20 Ton Impact Hammer

Black & Webster Presses

Ideal for Light Stamping, Forging, Trimming, Molding, Crimping, Coining, Riveting, Staking, Forming, Flexibility

The Air-Hydraulics, Inc., impact hammer has numerous advantages over larger, heavier and more expensive mechanical presses, which are used to perform the same tasks. The operation is opposite to that of the mechanical press. With the impact hammer the stroke is constant. Impact pressure may be varied precisely up to the press capacity, The pressure then remains the same at any point along the stroke. Breakdowns due to variation in stock thickness, or to improper positioning are eliminated by this feature.

Contact Us Today Phone: 1-800-837-4355 or Email: info@airhydraulics.com

Z6 20 Ton Impact Hammer

Movies

Impact Hammer Operation

Animations

Impact Hammer Animations

CAD Files

Impact Hammer CAD Files

Dimensions

Impact Hammer Dimensions

Manuals

Impact Hammer Manual

Control Options

  •  
  • Available in Electric or Pneumatic
  • Dual Palm Anti-Tie Down Pushbuttons
  • Installed Complete: Filter, Regulator, Lubricator, Safety Lockout Valve, Impact Adjustment, and Mufflers
  •  
  •  

Dimensions & Specifications

  • Max. Impact In Tons With 100 PSI Air: 20
  • Cylinder I.D.: 6"
  • Ram Diameter: 2-1/4"
  • Constant Stroke (For Max. Impact): 4"
  • Overall Stroke: 5"
  • Open Height (Platen to Ram Extended for Max. Impact: 11"
  • Throat Size (Center of Ram to Column): 8"
  • Platen Area: 11" x 8"
  • Air Cushion at Bottom of Stroke After Max. Impact: Yes
  • Strokes per Cu. Ft. of 100 PSI Air: 15
  • Strokes per Minute: 60
  • Connecting Pipe Size: 1/2"
  • Shipping Weight in lbs.: 800
  • Hole Size in End of Ram: 7/8" x 1-3/4"
  • Cubic Inch of Air per Cyc.: 111.01
  • Lift at End of Ram with 100 PSI Air: 369 lbs.