Safety Switch Probe Sensing Device

Black & Webster Protectoswitch safety switch

The Black & Webster/Air-Hydraulics Protectoswitch is an ideal way to protect your operators from pinch point accidents.

When the operator closes a hand or foot switch to activate the machine, the Protectoswitch intercepts the start signal and automatically drops a probe around the work area. If an obstruction is sensed the machine will not fire until the obstruction is removed. If the work area is free of obstructions, the probe falls to its full stroke which closes an actuating switch to fire the machine.

Contact Us Today Phone: 1-800-837-4355 or Email: info@airhydraulics.com

SAF-6/6-1 ProtectoSwitch

Movies

Safety Switch Operation

Animations

Safety Switch Animations

CAD Files

2D and 3D Drawing Files

Control Packages

Safety Switch Controls

Manuals

Safety Switch Manuals

Simplicity of design is the key to providing years of maintenance-free operation. Available in both electromechanical and pneumatic versions to eliminate interface problems and allow ease of installation.

Readily installed on all Black & Webster/Air-Hydraulics equipment or that of other manufacturers.

The Protectoswitch is supplied with a straight 24" long aluminum probe that must be shaped to the configuration of both the lower and upper tooling. Plastic sleeves are available in 1 1/2" and 2 1/4" and 3" diameters for adapting to the end of the probe.

Sequence of Operation

Upon activation, the solenoid retracts, the probe arm falls to the work area allowing the spring-loaded switch with roller to enter the detent on the probe shaft closing the circuit to the machines firing mechanism and allowing it to fire.


Safety Switch Probe Sensing Device Specs

Dimensions & Specifications

  •  
  • Electromechanical operation, 115V, 60HZ, 1ph
  • 20 amp capacity
  • Adjustable stroke, 2" max.
  • Cycles per minute, 40 max.
  • Housing dimensions 9 3/8" H x 4 5/8" W x 2 1/2" D
  •  
  • Weight, 5 lbs.
  •