The Model SH-250 Hydraulic Press is a mid-range, compact, high speed, hydraulic press designed to satisfy a wide range of production needs. This press package comes standard with a 240V/480V, 3 phase, self-contained hydraulic power unit and an air/oil heat exchanger for those high duty production applications.
Applications: Bushing/Bearing Insertion, Stud Insertion, Broaching, Swaging, Trimming, Assembly, Notching, Joining, Forming, and Fastening
SH-Series Information
SH-Series Compact Hydraulic Press Model Comparison
Description | Model SH-250 2.5 Ton Hydraulic Press | Model SH-300/400 5 to 10 Ton Hydraulic Press | Model SH-500 15 Ton Hydraulic Press |
---|---|---|---|
Specifications | |||
Force Range | 2,000 lb. – 5,000 lb. | 3,500 lb. – 20,000 lb. | 7,400 lb. – 30,000 lb. |
Stroke (Standard) | 6″ | 6″ | 6″ |
Cylinder Bore | 3.25″ | 4″ | 5″ |
Ram Diameter | 1.375″ | 2.000″ | 3.000″ |
Reservoir Capacity | 16 Gallons | 23 Gallons | 25 Gallons |
Motor H.P. | 3 HP / 1,800 RPM / 3 phase / TEFC | 5 HP / 1,800 RPM / 3 phase / TEFC | 5 HP / 1,800 RPM / 3 phase / TEFC |
Daylight (Standard) | 12″ | 14.50″ | 16″ |
Throat (Standard) | 6.25″ | 6.25″ | 8.25″ |
Approximate Weight | 700 lb. | 1,100 lb. | 1,700 lb. |
Floor Stand Weight | 205 lb. | 205 lb. | 405 lb. |
Ram Speed I.P.M. | |||
Approach | 420 | 300 | 165 |
Press | 65 | 60 | 40 |
Return | 440 | 320 | 210 |
Operating Pressure (P.S.I.) | |||
Minimum | 250 | 250 | 250 |
Maximum | 600 | 1,500 | 1,500 |
Standard Features & Options
Standard Features
- “Opto-Touch” Control Buttons, Non-Tie Down Control Circuit
- Rapid Ram Advance Using a Hi-Lo System
- Anti-Rotation Ram Guide
- 240V/480V, 3 Phase, Self-Contained Power Unit with Heat Exchanger
- Oil Level Gauge
- Nema Enclosure
- 120V Control Voltage
Available Options
- Matching Floor Stands
- Pressure / Dwell / Distance Return Options
- Adjustable Downstop
- Jog Control Circuit
- Fault Circuit Control Package (E-FI)
- Increased Stroke Lengths
- Press Frame Modifications
- Other Voltage Options
- Additional information on Control Packages
Custom Designed Options
- Light Curtains & Guarding Packages
- PLC Control Options
- 4-Post and 2-Post Designs
- Load Cell & Distance Monitoring Packages
- Selectable Modes of Operation
- Control Systems Designed for Future Expansion
- Custom Tooling and Fixture Packages
- Emergency Stop Control Circuit
- 24vDC Control Circuit
- Linear Position Transducer
- Custom Control Packages
Note: Our objective is to offer you a solution to your assembly and forming needs. If our standard features or available options do not meet your application requirements, please consult our factory to see about us offering an affordable solution to meet your design needs.
What custom modifications are best for your press equipment?
This free guide goes through key equipment modifications and which ones are best when you’re looking for optimal performance, efficiency and productivity for your operation.
Interested in our SH-Series units?