Z-Series
Impact Hammer
The Z-Series Impact Hammer has numerous advantages over larger, heavier and more expensive mechanical presses, which are used to perform the same tasks.
It comes complete with non-tie down dual actuators, F-R-L Unit, and an exclusively designed pneumatic valve. All components are assembled and mounted complete.
The impact hammer’s function is opposite to that of the mechanical press because the stroke is constant. Impact pressure may be adjusted precisely up to the press’ capacity. The pressure then remains the same at any point along the stroke so failures due to variation in stock thickness, or to improper positioning are eliminated.
Applications: Light Stamping, Forging, Trimming, Molding, Crimping, Coining, Riveting, Staking, Forming
Z-Series Information

Z-2 Impact Hammer

Z-6 Impact Hammer
Z-Series Impact Hammer Model Comparison
Description | Z-2 Impact Hammer | Z-6 Impact Hammer | |
---|---|---|---|
Specifications | |||
Max. Impact In Tons With 100 PSI Air | 6 | 20 | |
Cylinder I.D. | 3.50″ | 6″ | |
Ram Diameter | 1.50″ | 2.25″ | |
Constant Stroke (For Max. Impact) | 3″ | 4″ | |
Overall Stroke | 4″ | 5″ | |
Open Height (Platen to Ram Extended for Max. Impact) | 5″ | 11″ | |
Throat Size (Center of Ram to Column) | 6.78″ | 8″ | |
Platen Area | 10″ x 8.75″ | 11″ x 8″ | |
Air Cushion at Bottom of Stroke After Max. Impact | Yes | Yes | |
Strokes per Cu. Ft. of 100 PSI Air | 50 | 15 | |
Strokes per Minute | 60 | 60 | |
Connecting Pipe Size | .375″ | .500″ | |
Shipping Weight in lbs. | 210 lbs. | 800 lbs. | |
Hole Size in End of Ram | .562″ x 1.50″ | .875″ x 1.75″ | |
Cubic Inch of Air per Cycle | 29.096 | 111.01 | |
Lift at End of Ram with 100 PSI Air | 137 lbs. | 369 lbs. |
Standard Features & Options
Standard Features
- All pneumatic operation
- Chromed cylinder tube and column
- Non-Rotating Ram
- Adjustable daylight opening
- Speed and pressure control
- Riser Screw Adjustment (Model Z-6 only)
- Two-Hand / Non-Tie Down Pneumatic Actuators
- Remote T-Stand for Actuators (Model Z-6 Only)
Available Options
- Increased Daylight Opening
- Impact Head Sold Separately (Model Z-2 only)
- Custom Designed Machine Base
- Impact Force Monitor Package
- Custom Designed Guarding
Note: Our objective is to offer you a solution to your assembly and forming needs. If our standard features or available options do not meet your application requirements, please consult our factory to see about us offering an affordable solution to meet your design needs.
Z-Series Videos
Z6 & 20 Ton Impact Hammer
Z-Series Photos
Z-Series CAD Drawings
3-D CAD Drawings
3-D Viewing Files
*No CAD Software Needed
- Z-2
- Z-6
Interested in our Impact Hammers?